Essential Guidelines For Split AC Installation
Split Air Conditioners have offered many conveniences to those who can afford to use it. Unlike traditional conditioners, which are bulky and consume much energy, Split Air-conditioners are sleek and attractive; and they also do not consume much electricity. A split system air conditioner typically consists of two units: the outdoor unit which comes with the compressor; and the indoor unit which is fixed inside the room. As far as the installation process is concerned, split system air conditioner in adelaide is more comfortable than the traditional one. However, one must take care that the installation process is done in the right way; otherwise, poor installation may lead to other different maintenance problems.
While installing the Air-Conditioner, the following factors should be taken into consideration.
- Strength of the wall
Before the installation of the indoor unit, it is essential to check whether the wall can resist the weight of the unit. For this purpose, one should better check and do a proper examination of the strength of the wall before performing the installation process
- Adequate Spacing
During Split AC installation, it is highly indispensable to take great care of the proper spacing between the two units. It is recommended that the indoor unit should have a space about 15cm from the outdoor unit so that the indoor unit can perform its function well and the cooling does not waste.
- Appropriate Height
It is crucial to keep the standard height difference between the units. The outdoor unit should better be positioned about 7-8 feet above the ground. If the two units are not at an appropriate height, the indoor unit will not be able to perform its function well. The reason behind having reasonable distance is that the coolants flow between the outdoor and indoor units causing wastage of cooling, so to minimize the loss, it is always better to increase the height.
- Appropriate Tilt Angle of the Indoor Unit
It is better to give the AC’s bracket a slight tilt angle while fixing the aluminum bracket on the wall. The indoor unit should also be ensured to be at the tilted position to have a constant flow of the condensed water from the drainage pipe.
- Correct Location of the Outdoor Unit
To let the Air conditioner, perform its function well and cool down the room temperature, the indoor and outdoor unit must not face sunlight directly and is safe from water as well. Therefore, install the outdoor unit of the split AC up in open space so that the condenser faces no hindrance in dissipating heat.
- Proper Placement of the Outdoor Unit
The outdoor unit of the spit AC should be on a flat and rigid surface. The reason behind placing it on a plain surface is that the outdoor unit has a compressor, condenser, fan motors. If it is not on a flat surface, the outdoor unit will vibrate immensely, causing breakage of copper pipes, leakage of coolant as well as will harm condenser. Apart from that, vibration causes noise which people may find agitating. Find more detail plz visit here https://www.domesticacservices.com.au/